Skip to Content
HomeProductsCable systemsGreen Cable Surface 2W & 3W

Green Cable Surface 2W & 3W

Whether your project involves a bathroom, kitchen, basement or other room, Green Cable Surface offers you optimum comfort. Available in 2W and 3W, it perfectly fits all room shapes, offers maximum heating power and is compatible with most floor coverings.

Where to buy FLEXTHERM?
I am a:

UNIQUE IN ITS DESIGN AND COMFORT

Green Cable Surface 2W and 3W consists of two twisted and paired heating elements covered in copolymer. This innovation developed by FLEXTHERM uses ultra-resistant and high-performance components to provide you with perfect comfort, peace of mind, a healthy environment and real energy savings.

CABLE CONSTRUCTION

  1. Sheating
  2. Braiding
  3. Insulation
  4. Heating elements

For specifications, please refer to the Products Technical Specifications document.

COMPATIBILITY WITH INSTALLATION SURFACES AND FLOOR COVERINGS

2W
Installation surface Floor covering
Ceramic Natural stone Engineered wood2 Vinyl2 Floating floor2 Linoleum2 Parquet2 Carpet2
(without rubber backing or carpet padding)
Plywood
Smooth concrete1
Concrete panels
Ceramic
Acoustic membrane
Anti-fracture membrane
Scratch coat
Mortar bed1
5 cm spacing (2 in)
129 W/m2 (12 W/ft2)
 7.6 cm spacing (3 in)
86 W/m2 (8 W/ft2)

3W
Installation Surface Floor covering
Ceramic Natural stone Engineered wood2 Vinyl2 Floating floor2 Linoleum2 Parquet2 Carpet2
(without rubber backing or carpet padding)
Plywood
Smooth concrete1
Concrete panels
Ceramic
Acoustic membrane
Anti-fracture membrane
Scratch coat
Mortar bed1
7.6 cm spacing (3 in)
129 W/m2 (12 W/ft2)
 10 cm spacing (4 in)
97 W/m2 (9 W/ft2)

1 The concrete slab (or mortar bed) must be insulated to avoid heat loss at the bottom levelfrom below. FLEXTHERM also recommends that all rooms supported by the concrete slab be equipped with a FLEXTHERM floor heating system in order to avoid perimeter heat loss.

2 For coverings other than ceramic and natural stone, always check with the manufacturer of the floor covering to make sure its product is compatible with floor heating systems.

ELECTRICAL CHARACTERISTICS

Green Cable Surface 2W Green Cable Surface 3W
Standard voltage 120 and 240 volts (208 volts available upon request)
Output 6.6 W/linear m (2 W/linear ft) 9.9 W/ linear m (3 W/linear ft)
Output by type of installation 5 cm (2 in) spacing – 129 W/m2 (12 W/ft2)

7.6 cm (3 in) spacing – 86 W/m2 (8 W/ft2)
 7.6 cm (3 in) spacing – 129 W/m2 (12 W/ft2)

10 cm (4 in) spacing – 97 W/m2 (9 W/ft2)
Connection to thermostat Simple installation: a single cold lead is connected to the thermostat (return feed on the same cable)
Cold lead 3 m (10 ft)
Two conductors and grounding
Certification CSA Canada: series type 1B and 2D space heating

CSA U.S.: series type C space heating

Dry and wet environments
No significant electromagnetic field emission*

* Based on the instructions included in our FLEXTHERM installation guide, the recorded EMF measurement is considered insignificant (between 0.25 mG and 0.5 mG).