Green Cable Concrete

STEADFAST, LASTING COMFORT

Green Cable Concrete consists of two paired and twisted heating elements covered in copolymer. This innovation developed by FLEXTHERM uses ultra-resistant and high-performance components to provide you with perfect comfort, peace of mind, a healthy environment and real energy savings.

CABLE CONSTRUCTION

1. Sheating
2. Braiding
3. Insulation
4. Heating elements

For specifications, please refer to the Products Technical Specifications document.

COMPATIBILITY WITH FLOOR COVERINGS

Floor covering	Spacing Power
	10 cm (4 in) 161 W/m2 (15 W/ft2)	15 cm (6 in) 108 W/m2 (10 W/ft2)
Ceramic
Natural stone
Engineered wood1
Vinyl1
Floating floor1
Linoleum1
Parquet1
Carpet1 (without rubber backing or carpet padding)

¹For floor coverings other than ceramic and natural stone, always check with the manufacturer of the floor covering to make sure its product is compatible with floor heating systems.

INSTALLATION SURFACES

Concrete slab1

¹The concrete slab must be insulated to avoid heat loss from below. FLEXTHERM also recommends that all rooms supported by the concrete slab be equipped with a FLEXTHERM floor heating system in order to avoid perimeter heat loss..

ELECTRICAL CHARACTERISTICS

Standard voltage	240 volts (208 volts available upon request)
Output	16.4 W/linear m (5 W/linear ft)
Output by type of installation	Standard use 10 cm (4 in) spacing: 161 W/m2 (15 W/ft2) 15 cm (6 in) spacing: 108 W/m2 (10 W/ft2)
Connection to thermostat	Simple installation: a single cold lead is connected to the thermostat (return feed on the same cable)
Cold lead	3 m (10 ft) Two conductors and grounding
Certification	CSA Canada: series type 1B and 2D space heating CSA U.S.: series type C space heating Dry and wet environments
No significant electromagnetic field emission